Basic InfoModel No.: 5C Density: 1.3 G/cm3 Melting Point: 220℃ ELONGATION: 70% Rockwell Hardness: 114 Mold Shrinkage: 0.6-1.6% Tensile Modulus: 2900 Mpa Flexural Modulus: 3000 Mpa Water Absorption: 1.5%~3.5% Kind: Engineering Plastic Sheet Impact Strength（with Notch): 56 J/mContraction Percentage: 0......
Model No.: 5C
Density: 1.3 G/cm3
Melting Point: 220℃
Rockwell Hardness: 114
Mold Shrinkage: 0.6-1.6%
Tensile Modulus: 2900 Mpa
Flexural Modulus: 3000 Mpa
Water Absorption: 1.5%~3.5%
Kind: Engineering Plastic SheetImpact Strength（with Notch): 56 J/m
Contraction Percentage: 0.4%~1.4%
Tensile Strength: （81~130）MPa, 80 Mpa
Heat Deflection Temperature(HDT）: 66 ℃
HS Code: 3920920000
Place of Origin: Ningbo,China
Productivity: 500 tons per month
Supply Ability: 100 Tons Per Month
Packaging: Cartons and Pallet or according client's requirement
|Product Type||PA.PA66 Rod||
|Diameter||20 to 250mm||
||20 to 200mm|
White Black Blue Nylon Bar Standard Sizes is the generic name for a family of long-chain polymeric amides.
General characteristics of the nylons include toughness,strength,abrasion and fatigue resistance,low coefficient of friction,resiliency and heat resistance.
Many of these properties can be enhanced by the addition of fillers such as molybdenum disulphide. Nylons are resistant to hydrocarbons,alkalies,key tones and esters.
Engineering PlasticNYLONis a type of plastic that has excellent wear resistance and high tensile strength
What is difference between cast and extruded nylon?
The main difference lies in the manufacturing process.Cast poly amide products are manufactured by means of a chemical reaction process.This allows products with extremely large dimensions and custom cast parts to be manufactured. Water absorption and dimensional changes are lower in CAST,The crystallinity is greater so that wear resistance and machinability are better.Extruded absorbs more moisture and is thus tougher and has grester impact and vibration damping properties.
Key Features and Benefits
1.Very high sliding properties
2.High mechanical strength
3.Good fatigue resistance
4.Excellent wear resistance
5.Absorbs moisture so cannot be underwater
6.High impact strength and toughness
7.Low power factor requirements
8.High wear resistance
1.Natural nylon is an excellent food grade plastic
2.Black nylon is used where lubrication is required
3.High load bearings& Wear pads
4.Support and guide wheels
5.Conveyor and tension rollers
6.Wire rope sheaves& Buffer pads
7.Gears,etc High impact wear parts&Bushes